# Amped Raspberry Pi Media Center
Home Media Center powered by Raspberry Pi and PCM5100 DACs paired with TPA3110 D-class amp
- **Seller:** [Sonocotta store](https://lectronz.com/stores/sonocotta), Warsaw, Mazowieckie, Poland
- **Price:** $49.00 (USD, before shipping and taxes)
- **Availability:** Sold out
- **Categories:** Audio, Home automation, Raspberry Pi
- **Product page:** https://lectronz.com/products/amped-raspberry-media-center
## Options
**Board variant**
- USB-PD (you need an USB-PD capable adapter) (0 left)
- NOPD (you need a generic external power adapter) (2 left)
## Links
- [Documentation](https://hackaday.io/project/195272-raspberry-pi-media-center)
- [Code](https://github.com/sonocotta/raspberry-media-center)
## Images
## Description
## What is it?
The **Amped Raspberry Media Center** is a compact and neatly designed hardware project that combines the power of the Raspberry Pi Zero board and the Hi-Fi audio capabilities of the TI’s PCM5100 HiFi DAC combined with a highly efficient TPA3110D2 D-class amplifier. This versatile media center provides a customizable and fully open-source hardware platform for home entertainment.
## Why did I build it
I did a few audio projects in the past, some using [ESP32](https://sonocotta.com/esparagus-hifi-medialink/), some using larger [Orange Pi](https://sonocotta.com/orange-pi-media-center/) and [Raspberry Pi](https://hackaday.io/project/162373-orangepi-zero-pulse-music-server-using-i2s-dac) devices. Each has its pros and cons, and with each iteration, I'm trying to focus on the details that were working best for me while actually using them.
What is special about the Raspberry ecosystem is, of course, its community support. Being a not-so-strong software developer, I often have to rely on the work that other people did and baked into the base Raspbian image. Enabling the Ethernet and IR reader is as simple as adding 2 lines into `config.txt` file. Adding DAC is a 5-minute job (with [attached](https://github.com/sonocotta/tas5805m-for-raspbian-paspberry-pi-zero) code). All the device tree definitions, kernel drivers, and dependency packages are already in place, believe it or not.
Sure, compared to the ESP32 platform, it is not as lightweight. It requires more power, it takes some time to boot. But when it comes to rapid development, there is nothing like the Raspberry Pi.
**Amped Raspberry Media Center** brings all the best from the [HiFi model](https://lectronz.com/products/hifi-raspberry-media-center) and adds an onboard amp to form a complete solution that can be paired with speakers directly. It uses an external power source to feed hungry amps and host Pi using an onboard drop-down converter. It has similar power capabilities to the Amped Raspberry DAC, but it is much simpler to use since it only needs a valid I2S signal to operate, so it is a single line of configuration in the `config.txt` file.
## Use cases
**Amped Raspberry Media Center** is a flexible, open-source audio platform designed to fit into both smart homes and custom audio projects.
* **Smart Home Audio, TTS & Automation Node**
Integrates with Home Assistant and Music Assistant for high-quality playback, text-to-speech, and event-driven announcements. Functions as both an audio endpoint and a networked automation node for sensors, triggers, and smart home workflows.
* **Multi-Room Audio Infrastructure**
Use **Amped Raspberry Media Center** as a Snapclient server and endpoint for perfectly synchronized distributed audio. Ideal for open, vendor-neutral whole-home or commercial audio systems.
* **Standalone Network Player & Streaming Hub**
Run LMS/Squeezelite for a self-contained streaming device supporting Spotify Connect, AirPlay, and Logitech Media Server — no external computer required.
* **Embedded Audio Processing & DSP Platform**
Execute real-time digital signal processing, filtering, effects, or audio analysis directly on-device. Suitable for smart speakers, alert systems, acoustic sensing, and custom audio interfaces.
* **Networked Sensor & Interface Controller**
Combine audio output with GPIO control, sensors, buttons, displays, or actuators. Ideal for interactive installations, smart appliances, voice feedback devices, or industrial status systems.
* **Educational Platform for Systems & Networking**
A practical teaching platform for embedded Linux-style workflows without full SBC overhead — covering networking, streaming protocols, real-time processing, IoT architectures, and open-source audio systems.
* **Rapid Prototyping for Connected Products**
Designed for fast iteration of networked hardware products — from smart audio devices and notification systems to interactive kiosks and connected consumer electronics.
* **Open Platform for Custom Products & DIY Builds**
With fully open firmware and tooling, **Amped Raspberry Media Center** provides a flexible foundation for personal projects, research platforms, or commercial device development.
## Features
| | [Amped Raspberry Hat 1X](https://lectronz.com/products/amped-raspberry-hat) | [Amped Raspberry Hat 2X](https://lectronz.com/products/amped-raspberry-hat) | Amped Raspberry Media Center |
|---|---|---|---|
| Image |  |  | | Compatible with | Every Pi | Raspberry Pi 5 | Raspberry Pi Zero (W), Raspberry Pi Zero2 W |
| DAC | PCM5100A 32-bit Stereo DAC | Dual PCM5100A 32-bit Stereo DAC | PCM5100A 32-bit Stereo DAC |
| Amp | TPA3110D2 D-Class amp; TPA3128 starting from Rev E | TPA3110D2 D-Class amp | TPA3110D2 D-Class amp; TPA3128 starting from Rev E |
| Line Output | 2.1 VRMS Line level output -100 dB typical noise level | 2.1 VRMS Line level output -100 dB typical noise level | 2.1 VRMS Line level output -100 dB typical noise level |
| Output, 8Ω, 1% THD (TPA3110) | 2x 22W | 4x 22W | 2x 22W |
| Output, 8Ω, 1% THD (TPA3118/3128) | 2x 25W | - | - |
| Output, 4Ω, 1% THD (TPA3110)| 2x 25W | 4x 25W | 2x 25W |
| Output, 4Ω, 1% THD (TPA3118/3128) | 2x 40W | - | - |
| IR input | ✅ | ✅ | ✅ |
| RGB LED | ❌ | ❌ | ✅ |
| Onboard Serial Bridge | ❌ | ❌ | ✅ |
| Wizznet W5500 Ethernet | ❌ | ❌ | ✅ |
| Mechanical dimensions (WxHxD) | 65mm x 56mm x 20mm | 65mm x 56mm x 20mm | 88mm x 38mm x 100mm |
| Power requirement | up to 26V from external PSU | up to 26V from external PSU | 65W USB-C PD power adapter
or
up to 26V from external PSU |
⚠️ *Amped boards can't drive headphones and speakers at the same time (unless you modify them)*
💡 *Don't need to connect speakers? Check out [HiFi Raspberry Hat](https://lectronz.com/products/hifi-raspberry-hat) and [HiFi Raspberry Media Center](https://lectronz.com/products/hifi-raspberry-media-center)*
💡 *Don't need to connect headphones or an external amp? Check out [Loud Raspberry Hat](https://lectronz.com/products/loud-raspberry-hat) and [Loud Raspberry Media Center](https://lectronz.com/products/loud-raspberry-media-center)*
## Board Pinout
| | I2S CLK | I2S DATA | I2S WS |
|---------------------|---------|--------------------|--------|
| Raspberry Pi Zero | 18 | 21 | 19 |
| Raspberry Pi 2,3 | 18 | 21 | 19 |
| Raspberry Pi 5 | 18 | 21, 23, 25, 27 | 19 |
## How to use
You need nothing more than an SD card with a Raspbian image and a USB-C power brick. You can use any distribution you like. The only change you need to make to enable hardware is to add 3 lines to the `/boot/config.txt`
```
dtoverlay=hifiberry-dac
```
## Hardware
| Front | Back | PCB |
|---|---|---|
|  |  | 
Please visit the [hardware](https://github.com/sonocotta/raspberry-media-center/tree/main/hardware) section of the project repo for board schematics and PCB designs. Note that PCBs are shared as multi-layer PDFs as well as Gerber archives.
#### Amped Raspberry NOPD
The “hammer-style” solution I came up with is a NOPD version of the Amped Raspberry that lets you use a barrel power jack to supply raw voltage directly. The catch? Standard 2mm pins can’t handle high currents, so I’ve gone with a 2.5mm pin instead — it’s a bit unusual, but still common enough in the laptop world.
With this setup, you can supply more than the 20V limit of PD, giving you a bit more power for the speakers. You probably won’t hear much difference (thanks to the way human hearing works), but it could help larger speakers that need a bit more to really “open up." Other than that, the NOPD version works just like the PD version — no software changes are needed.
#### External voltage selection
The power adapter specs depend on the speaker you're planning to use. DAC efficiency is close to 100%, so just take the power rating of your speaker (say 2x10w) and impedance (say 8 ohms), and you'd need at least 9 volts rated at 1.2 amps per channel, round up to 3 total amps. Consider Pi itself drawing 5-10W of power when busy.
It is not recommended to go beyond the voltage your speakers can take, otherwise, the amp will blow your speakers in no time.
The absolute maximum voltage for the TPA3110 Amp is 30V, but it is not guaranteed to be thermally stable in this condition.
# Restocking & Availability
New restock batches are regularly ordered from the factory, and I plan to keep all versions available at least until the next board revision is released.
## USA shipping Update
Due to the new tariffs introduced by the Trump administration, standard shipments are temporarily on hold. However, shipping to the US has now resumed via UPS, though rates are currently quite high. I’ll fully resume regular shipping as soon as the restrictions are lifted.
## Sponsorship & Community Support
If you’re working on an open-source project, an educational initiative, or any pro-bono/volunteer effort, feel free to reach out for sponsorship details. I’ll do my best to provide discounts or even free boards.
## Custom Design & Consultation
If you’re interested in a custom design based on, or inspired by, my boards, I also offer contract design work and consultation when needed.
## Shipping policy
Most orders are shipped the next business day morning. All shipments are tracked. Delivery time in the EU is 3-7 days, outside 2-3 weeks, depending on the distance. After 30 days, the package is considered lost - reach out for a refund or replacement.