# LCD for Sharp EL-5100/5100S

LCD replacement for Sharp EL-5100/5100S pocket computer

- **Seller:** [The Half-Baked Maker's LCDs](https://lectronz.com/stores/halfbakedmaker-lcd), Morgan Hill, California, United States
- **Price:** €18.20 (EUR, before shipping and taxes)
- **Availability:** In stock
- **Categories:** Displays
- **Country of origin:** United States
- **HS code:** 85241100
- **Product page:** https://lectronz.com/products/lcd-for-sharp-el-5100-5100s

## Images

![LCD for Sharp EL-5100/5100S](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6Nzc3ODAsInB1ciI6ImJsb2JfaWQifX0=--f37daf2fd9e83e0d835ef4032359fc9da3af9e34/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/el-5100.jpg)

## Description

### What is it?

This is a pin-for-pin compatible nearly exact replacement for the LCD module in the [Sharp EL-5100](http://www.arithmomuseum.com/album.php?cat=c&id=195&lang=en) pocket computer released in 1979. I am not certain at this time whether this LCD will also fit the EL-5100S.

### Why did you make it?

Many EL-5100(S) pocket computers suffer from LCD degradation to the point where they are no longer useful. Apparently the seal around the LCD was of poor quality, and over the years moisture gets in and ruins the liquid crystal. The result is a display ranging from a few splotches to complete failure.

![LCD showing complete degradation](https://i.imgur.com/Kp8ojdT.jpg "Completely degraded EL-5100 LCD")

I decided that it was important to bring all these dead EL-5100 computers back to life by reverse-engineering the LCD and remanufacturing them.

### What makes it special?

These LCDs were custom manufactured by Sharp for the EL-5100. Replacement LCDs were never available, and finding a working LCD is problematic, given the systematic failure of the seal.

I tried as much as possible to make the fonts and positions used for the indicators as identical to the original as possible.

![Replacement LCD](https://i.imgur.com/vcwFZ7M.jpg "Replacement LCD")

### Instructions for replacement

The instructions are the same as for the Sharp PC-1211. I've made [a video](https://www.youtube.com/watch?v=S8Vagc0FJK8) showing how to replace one of those LCDs. There are a few crucial things you have to be aware of:

- Be sure to remove the plastic protective sheet on the top before installation.
- After removing the bezel+LCD assembly from the original computer, you'll need to soak the assembly in acetone for 2 to 3 hours to get the old LCD unstuck from the bezel. Alternatively, I've heard about successes by putting the assembly on a hotplate set to 100C for about three minutes -- be very careful that you don't burn yourself!
- Wipe the contacts on the new LCD and clean the elastomeric strips from your existing computer with isopropyl alcohol -- preferably the 99.9% purity kind.
- You should not have to adjust the contrast or remove any potentiometer.
- Replacing the LCD will not guarantee a working computer! There could be other faults.
- Getting the positioning right is crucial. You should be okay by pushing the end of the LCD **without ** the bump against the side of the bezel.
