# Resol VBus to UART Board – Home Assistant ESPHome

Assembled Resol VBus interface board — read your solar thermal controller into Home Assistant via ESPHome. Add an ESP32.

- **Seller:** [Solbus](https://lectronz.com/stores/solbus), Dublin, Ireland
- **Price:** €28.00 (EUR, before shipping and taxes)
- **Availability:** In stock
- **Categories:** ESP32, Home automation, WiFi
- **Country of origin:** China
- **HS code:** 847330
- **Product page:** https://lectronz.com/products/solbus-resol-vbus-uart-board-home-assistant

## Links

- [Documentation](https://esphome.io/components/vbus.html)

## Images

![Resol VBus to UART Board – Home Assistant ESPHome](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NzY4NzQsInB1ciI6ImJsb2JfaWQifX0=--ffbe97de9c6ac8f043c0c9787f27773cc169af29/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJqcGciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--970c165836a83091725a1a0fd4f37ce9408da1bf/2026-10-12T20-20-47.211Z-VBus_board.jpg)
![Resol VBus to UART Board – Home Assistant ESPHome](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NzY4NzUsInB1ciI6ImJsb2JfaWQifX0=--19dead4f60db6d13ccc9966fa52f6dc997c97bd5/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJwbmciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--605f1da017bcbb03ce31845cd0e81d97e3b3c574/2026-10-28T11-54-35.290Z-HA_solar_card_tindie.png)
![Resol VBus to UART Board – Home Assistant ESPHome](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NzY4ODMsInB1ciI6ImJsb2JfaWQifX0=--3a51abf485cc4eadd1c629068fcc64031c5f3fd2/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJwbmciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--605f1da017bcbb03ce31845cd0e81d97e3b3c574/vbus_wiring_diagram.png)
![Resol VBus to UART Board – Home Assistant ESPHome](https://lectronz-images.b-cdn.net/lectronz/active_storage/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6NzY4ODcsInB1ciI6ImJsb2JfaWQifX0=--c1635db296b82432b0276f070f43215452fb75bb/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJwbmciLCJyZXNpemVfdG9fbGltaXQiOls5NjAsNjQwXSwic2F2ZXIiOnsic3RyaXAiOnRydWV9fSwicHVyIjoidmFyaWF0aW9uIn19--605f1da017bcbb03ce31845cd0e81d97e3b3c574/J5%20pinout.png)

## Description

Bring your Resol solar controller into Home Assistant.

An assembled interface board that reads the VBus data from Resol / DeltaSol solar thermal controllers and converts it to clean UART for an ESP32 (or ESP8266) running ESPHome. Wire it up and pull your solar system's live data — up to four temperature sensors, two pump-speed channels, operating hours and heat quantity — straight into Home Assistant.

Rolling your own means a minimum board order, a two-week wait, sorting the BOM and placement files, then working out the VBus data offsets to get a reading. This one is done: SMD parts machine-fitted (not hand-soldered), tested, and ready to wire in.

What you get

Fully assembled, tested board
Header pins included — VBus is a simple 2-wire, non-polarised connection
A ready-to-use ESPHome config for the DeltaSol BS/2 HE (and rebadges such as Joule)

You supply
An ESP32 (or similar) and a few jumper wires. The board runs off the ESP's 3.3 V — no separate supply.

Wiring

2-pin (U8) → controller VBus terminals (non-polarised)
3-pin (J5) → ESP: VCC → 3.3 V · DATA → UART RX (e.g. GPIO16) · GND → GND

Compatibility
The board reads any Resol / DeltaSol VBus controller — the same unit is rebadged worldwide, so it may not say "Resol" on the front. In Europe it's also sold as Viessmann / Vitosolic, Sonnenkraft, Kingspan, De Dietrich, Caleffi and others; in Australia as Apricus, Thermann and Dux; in the US / Canada it's usually badged Resol / DeltaSol directly, or Caleffi iSolar. Many DeltaSol models (BS Plus, BS/2, C, CS2, CS4, CS Plus) are natively supported in ESPHome — just select the model. Other models are read by the board and set up with a short custom config. Not sure about yours? Message me your controller model before buying and I'll tell you straight.

Note: heat-quantity readings need the controller's flow/return sensor fitted — without it, that value reads 0.

Based on the open-source FatBeard VBus design — credit to the original author. Sold as a hobbyist board, no warranty.

## Shipping policy

Orders ship from Dublin, Ireland via An Post, usually within 1–2 working days. Standard Post is untracked.

Typical delivery times: Ireland 1–3 days, UK and EU 1–2 weeks, Canada/Australia/NZ 2–3 weeks.

EU and Northern Ireland orders have no customs charges. Orders to Great Britain and outside the EU are sent with a customs declaration.
