This store is temporarely paused.
It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin
Ready to Ship in 12hours
Batch Update
As of 15.03.2024, We have re-stocked the ESP Prog Board in a batch size of 20 pieces. Orders are processed in 24hours
As of 31.03.2023, We have re-stocked the ESP Prog board in a lot of 50, Order processing time has been now reduced to 12hours.
As of 4.02.2023, We have re-stocked the ESP Prog Board in a lot of 20. Orders are fulfilled in 24hours
This batch is now RoHS Compliant for EU Customers
What is it?
ESP Prog is ESP32 Programmer board. It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin control along with UART RX, and TX for flashing the MCU with a new program. Or one can also use it as a USB to UART adapter.
Why did you make it?
In the last couple of months, we designed quite a few custom-embedded products for our customers where we used ESP32 for Wi-Fi connectivity.
The challenge we faced was with the ESP32 Flash programming once the board is ready.
There is no ESP32 programmer board available in the market that can be used for programming the production boards easily.
Atleast we were not able to find it easily which we can buy and use it. Do you know any, please do share them with us?
To handle the situation, we had to use readily available ESP32 Dev kits, we took out the ESP32 module from them, and then took RX, TX, Boot, and Reset pin along with 3.3V and GND signals onto a header connector via small cable and used it as ESP32 programmer. See the image below š
What makes it special?
- Compact size: 50mmx30mm
- USB-C Type Interface: you can connect a USB in any direction. Use USB-A to USB-C Cable.
- LEDs for Power, RX, TX
- Switch for Reset and Boot
- Both 3.3V and 5V are available on the O/P connector
- All signals on a standard 2.54mm Pitch Header (Header will come along with the board (unsoldered))
Links to code and documentation
Product HS Code: 84733030
Shipping policy
1. The orders are now processed within 24 hours. We may pre-pone or post-pone the delivery for any gazetted holiday of the postal department.
2. Shipping methods are facing 93% accurate transit time (As of 7th May 2024), Please note that shipping charges don't include insurance of the consignment.
3. Projects involving batteries will be shipped Excluding the batteries due to IATA regulations.
4. The offerings from MakerPals are shipped from the "BhÄrat Gaį¹arÄjya" (Republic of India). The prices shown for the products here are Shipping Insurance/customs/ taxes/duties excluded. NOTE: The buyer has to pay for the customs/taxes/VAT solely if any levied on the order.
For disputes, Email shipping@makerpals.in with the order ID and subject. We shall revert at the earliest.
