Fully assembled solar-powered Meshtastic node station with RAK4630. Ready to use and preloaded with latest firmware.

In 213 carts

Fully Assembled Meshtastic Solar Node Station

Sold by μArt.cz

$172.61

No tax for United States [change]
Choose the preffered battery type
Choose the connector and antenna type
The mount diameter for you antenna pole
Stock available: 4
Lora
Nordic nRFxxxx

This fully assembled and working Meshtastic node station is the perfect solution for anyone looking to set up a reliable, solar-powered Meshtastic station or router node without the hassle of building and assembling it themselves. Whether you're new to Meshtastic or an advanced user short on time, this product allows you to extend your Meshtastic network with ease.

The station is built on my custom-designed Meshtastic motherboard, featuring the RAK4630 module with a high-efficiency MPPT (Maximum Power Point Tracking) solar charger for solar panels with the working voltage from 7 V to 30 V. Every station is tested and calibrated to ensure it works flawlessly right out of the box.

I build each Meshtastic station afther your order, starting the printing and assembly process only after it is placed. This ensures minimal material waste and allows me to customize the product to meet your specifications. Please allow up to 4 days for assembly, testing, and shipping.

Additionally, I can customize the station to fit different antenna pole diameters, ranging from 20 mm to 50 mm, ensuring compatibility with your setup. Please, choose the right diameter of your antenna pole.

Meshtastic station

Features

  1. Plug-and-Play Operation: This node arrives fully configured, ready to deploy. Just connect your solar panel and battery, and you're good to go.
  2. Solar-Powered with MPPT: The integrated MPPT charger maximizes energy harvested from your solar panel, ensuring optimal performance even in challenging weather conditions.
  3. Pre-Programmed with Meshtastic Firmware: No need for flashing or complex setup. The station is preloaded with the latest stable Meshtastic firmware, and firmware updates can be performed easily via USB.
  4. Robust Enclosure for Outdoor Use: The station is housed in a durable, weather-resistant enclosure with IP-rated connectors to ensure reliable operation in various environments.
  5. Highly Configurable: Built for flexibility, the station supports a wide range of batteries and solar panels, allowing you to tailor it to your specific needs.
  6. DIY-Friendly Design: If you'd like to create your own station, you can access the detailed assembly guide and 3D-printed parts published on my website.

Technical Specifications

  • Motherboard: Custom PCB with RAK4630 module for 868 MHz (Europe frequency).
  • Solar Input: MPPT charger for 7 V to 30 V solar panels.
  • Battery Compatibility: Li-Ion, LiPo, LiFePO4 or LTO batteries (or any lithium based batteries with the voltage less stan 5.6 V)
  • Enclosure Dimensions: 120 mm x 80 mm x 50 mm (approx.)
  • Connectivity:
    • LoRa for long-range communication
    • USB-C for programming (optional)
    • UART for connecting to your application
    • I2C for connecting any supported sensor

Please note: If you choose an LTO battery, one connector will be used for battery connection. You can enable power metrics in the telemetry settings of the Meshtastic firmware to monitor the battery's current and voltage.

LTO Availability: I'm in the final stage of testing the LTO BMS (more details about my progress can be found on uart.cz). Once testing is complete, LTO batteries will be available for order. Until then, they remain out of stock.

Firmware compatibility

The Meshtastic Motherboard used in this station is electrically compatible with the RAK4631, so any firmware running on that board will work on the Meshtastic Motherboard. I have already tested the following projects:

  • Meshtastic (any version)
  • MeshCore (all variants work: Repeater, Room Server, and Companion Radio)
  • Reticulum (tested by a customer, RNode firmware)

Package Includes

  • Fully assembled Meshtastic station with a 10 W solar panel and 3 Ah Li-Pol or 3.9 Ah LTO battery.
  • External RP-SMA antenna for 868 MHz (only for variant with the SMA connector).
  • Quick start guide.

Please note: If you choose the N connector, an antenna will not be included in the package. Antennas with this connector are quite large and difficult to ship. Choose this option only if you are an experienced user and plan to use your own antenna.

Applications

  • Expanding existing Meshtastic networks
  • Community mesh networks in urban or rural areas
  • Solar-powered nodes for off-grid communication
  • Emergency and disaster-preparedness systems

Why Choose This Product?

Building a Meshtastic station from scratch can be rewarding, but it requires time, tools, and expertise. By choosing this fully assembled solar node station, you get a tested solution that is easy to install. Focus on exploring, expanding your network, or helping your community stay connected – without worrying about assembly or troubleshooting.

I published the schematics, 3D model, and detailed information about the Meshtastic Motherboard. All the 3D-printed parts are also available on Printables. You can modify, fix, or completely rebuild this station yourself later if needed.

Why Buy from Me?

I’m a maker, Meshtastic and HAM radio enthusiast who designs and manufactures every board myself. Sharing my creations with other makers is a way to contribute to the community I love. By purchasing from me, you not only support my work but also help fuel future designs and innovations. Your support means the world — thank you!

Links to code and documentation

Documentation (uart.cz)

Design Files (printables.com)

Schematics (pcb.uart.cz)

Shipping policy

I use Packeta for shipping, a Czech company that delivers packages using the best method for each destination country.

Shipping Times: Typically under 2 weeks for the European Union and some other European countries.

Lost or Damaged Packages: If your package is lost or damaged during transit, please contact me. I’ll work with you to find the best solution.

Shipping to Other Countries: If your country isn’t listed (outside the EU), feel free to send me a message. I’ll do my best to find a way to ship the package to you.

If you have any questions or if something went wrong, send me a message, and I'll do my best to resolve the issue.

This product does not ship to United States.

The seller

μArt.cz

Nivnice, Czechia
9 orders since Nov 24, 2024
Electronics made by a nerd for other nerds. Here, you’ll find original PCB designs and gadgets — practical PCBs for your projects, all created in my spare time.