One Inch Fibonacci32 is a tiny, beautiful 25.4mm circular disc with 32 1mm WS2812B RGB LEDs surface mounted in a Fibonacci distribution.

It consists of 32 SK6805-1515 1.5mm addresssable RGB LEDs, arranged into a circular <a href="https://en.wikipedia.org/wiki/Fermat%27s_spiral">Fermat's spiral</a> pattern.

I have created several LED art pieces in Fibonacci patterns. They are all very labor intensive to create, and so are fairly expensive and limited in quantity. I wanted to come up with a Fibonacci layout that was at least slightly easier to create, and therefore more affordable.

I have RGB LEDs in just about every form they come: strips, strings, rings, discs, etc. The LEDs on most discs are arranged in very regular rings. One Inch Fibonacci32 is different. The LEDs are arranged in a Fibonacci distribution. The makes the layout very organic and seemingly messy. But with the proper animation, spiral patterns emerge with spectacular results.

The SK6805-1515 each only consume a maximum of 15mA, and that's at 100% brightness, solid white color. That's only 480mA for all 32 combined. They are still very bright, and I usually only run them at about 25% brightness. They're perfect for wearables, powered with LiPo batteries.

It has solder pads on the back that match the pinout of the QT Py by Adafruit, or XIAO by Seeed. It can be used by any microcontroller via the 5V, GND, and Data In pins.

The four mounting holes are surrounded by capacitive touch compatible pads. They're connected to the touch pads/pins on the QT Py SAMD21 footprint. The SAMD21 QT Py supports capacitive touch on these pins.

Options

The open case is built with 3mm black LED acrylic diffuser, 3D printed PETG back plate, black M2x10mm screws, and black M2 nuts. Available as kit or fully-assembled.

Specifications

• Size: 1 x 1 x .063 inch (25.4 x 25.4 x 1.6 mm)
• 2 layer printed circuit board
• FR4 substrate
• Black SMOBC (solder mask over bare copper)
• HASL (Hot Air Solder Leveling)
• Designed in the US by Evil Genius Labs

Parts

Options available to purchase for additional amount:

• Diffuser: 3mm black LED acrylic 29mm circle.
• Open Case Kit: diffuser, back cover, M2 hardware.
• Fully Assembled: diffuser, open case, and assembled QT Py by Adafruit controller.

The "Fully Assembled" option requires, but does not include, a USB-C cable and power source (USB port, AC power adapter, battery pack, etc).

If the "Fully Assembled" option is not chosen, these parts are not included, but are required to assemble and use:

• Microcontroller (Arduino, ESP8266, ESP32, etc)
• Wires, connectors, crimp tool, etc.
• Soldering iron, solder, etc.

Parts I used in my builds:

• QT Py by Adafruit
• Chemcast Black LED Acrylic

Assembly Instructions

* Orders are normally shipped within one business day.

* Emails are sent with tracking numbers once orders ship.

* Orders ship from the US.

* Depending on the destination, orders normally arrive within a few days in the US, and up to several weeks internationally.

Returns and warranties:

* Returns are not accepted.

* If I make a mistake, just contact me, I will fix it.

* If mistakes are made assembling kits, I will provide assistance.

Customs and import duties:

* International orders may be subject to duties, taxes, import fees, etc.

* These fees are not included in the price of the products, or the order total.

* These fees are the sole responsibility of the buyer.

* These fees vary based on the products and destination country.

* For more information, please contact your local customs office.