DESCRIPTION

This is a full-color printed custom motherboard for the game Tetris DX for Game Boy. You can use it to customize your original Tetris DX, whose battery has long since died or whose original PCB has become damaged or corroded.

Additionally, as you can see in the photos, this new circuit will give an incredible look to your Tetris DX. Pair it with a transparent Game Boy or Game Boy Color shell to show off the artwork.

FEATURES

• New full-color printed motherboard for Tetris DX!
• Replace the battery without soldering whenever it needs replacing.
• Compatible with GBFlash, allowing you to back up your save before the transplant and restore it afterwards.

INCLUDED

• 1x Full-color printed custom motherboard.
• 2x 10K 0603 resistors (1 required).
• 4x 10nF 0603 capacitors (3 required).
• 1x Battery holder.

REQUIRED (NOT INCLUDED)

• An original Tetris DX donor cartridge.
• Transparent game cartridge shell for Game Boy or Game Boy Color. (1)
• New CR2032 button battery.
• 3.8mm gamebit screwdriver.
• Sandpaper or metal files (2)
• Tweezers.
• Soldering iron.
• Solder.
• Flux.
• Isopropyl alcohol.

(1) Remember to purchase the shell for the motherboard. You can use either a Game Boy or Game Boy Color shell, as both are fully compatible.

(2) This step may be optional. Depending on how closely the replacement shell matches the original, you may need to file the side tabs slightly. These tabs help prevent the motherboard from moving inside the shell.

DOCUMENTATION

• https://github.com/giltesa/Tetris-DX-PCB/raw/master/3.%20Documentation/Installation%20Guide.pdf

https://shop.giltesa.com/shipping-policy/