This product was designed by Unexpected Maker.
By buying this product you support original hardware creators.
TinyPICO Nano is the world’s smallest, fully-featured ESP32 microcontroller module
Meet TinyPICO Nano V4
TinyPICO Nano V4 is the same TinyPICO Nano as the original. The Ignion antennas used on earlier versions have been discontinued, so V4 now includes a new high gain 3D antenna and RF network.
Features & Specifications
| Processor | ESP32-PICO-D4 · 32-bit · Dual-core LX6 · up to 240 MHz |
| Flash | 4 MB QSPI |
| PSRAM | 4 MB QSPI |
| GPIO | 27 |
| Wireless | Wi-Fi 4 2.4 GHz · 802.11b/g/n · Classic BT + BLE 4.2 |
| USB | USB-to-serial / UART programming |
| Power | 700 mA · 3.3 V regulator · enable pin for LDO on/off control |
| Battery | LiPo battery management · optimised power path for low-power battery use |
| Connection | VBAT pin for battery connection |
| Size | 27 × 13 mm |
| PCB | 1 mm thick, previously 0.8 mm |
TinyPICO Nano now ships with a CH9102F Serial UART chip like the regular TinyPICO. Blue power LED indicates CH9102F.
Compare the modules.
EdgeS3[D], OMGS3, NanoS3 and TinyPICO Nano specifications
| EdgeS3[D] | OMGS3 | NanoS3 | TinyPICO Nano | |
|---|---|---|---|---|
| MCU | ESP32-S3-PICO | ESP32-S3-PICO | ESP32-S3FN8 | ESP32-PICO-D4 |
| Processor | Dual-core LX7 · up to 240 MHz | Dual-core LX7 · up to 240 MHz | Dual-core LX7 · up to 240 MHz | Dual-core LX6 · up to 240 MHz |
| Flash | 8 MB | 8 MB | 8 MB | 4 MB |
| PSRAM | 2 MB | 2 MB | 8 MB | 4 MB |
| Available IO | 29 + 8 | 17 | 27 | 27 |
| 2.4 GHz Wi-Fi | Wi-Fi 4 | Wi-Fi 4 | Wi-Fi 4 | Wi-Fi 4 |
| Bluetooth | BLE 5 + Mesh | BLE 5 + Mesh | BLE 5 + Mesh | Classic BT + BLE 4.2 |
| Zigbee / Thread | — | — | — | — |
| Format / connection | M.2 B-Key module | Surface-mount module | Surface-mount module | Surface-mount module |
| USB | Via carrier · USB OTG / JTAG | Via carrier · USB OTG / Serial / JTAG | Via carrier · USB OTG / Serial / JTAG | Via carrier · USB-to-serial |
| 3.3 V regulators | 1 × 700 mA | 1 × 700 mA | 1 × 700 mA | 1 × 700 mA |
| STEMMA QT | — | — | — | — |
| RGB LED | — | NeoPixel | NeoPixel | — |
| Antenna | Onboard + u.FL · software switch | Onboard | Onboard | Onboard |
| Battery | I²C fuel gauge + LiPo charging | I²C fuel gauge + LiPo charging | LiPo charging | LiPo charging |
| Size | 22 × 23 mm | 25 × 10 mm | 28 × 12.7 mm | 27 × 13 mm |
Getting Started Using Your TinyPICO Nano
Please have a read through our Getting Started Guide for information on how to start using your TinyPICO Nano Development Board.
Code any way you like!
Ships with MicroPython pre-installed!
The TinyPICO Nano ships with MicroPython for the ESP32.
Of course, you can choose from a wonderful array of other languages and platforms. Explore them all below....
Downloads
Download TinyPICO Nano resources, including the schematic, 3D model, KiCAD footprint and more.
GitHub
The TinyPICO hardware GitHub repository includes:
- 3D STEP and STL files for TinyPICO Nano
- Mechanical drawing
- KiCAD, Eagle, Altium and DipTrace footprints
Certification
TinyPICO NANO ships uncertified. If you use a TinyPICO NANO on a project that requires certification, you’ll be required to also certify the WiFi and Bluetooth radios.
Links to code and documentation
Documentation (unexpectedmaker.com)
Product HS Code: 8542310070
Shipping policy
All products purchased from this store ship directly from me here in Melbourne, Australia. Orders are processed daily and usually go out within a few days! I'm currently unable to ship to Germany, Denmark, or Sweden, but I am doing my best to work with Australia Post and Zonos about this issue; sorry for any inconvenience. Finally, postage rates suck, and they keep going up; sorry :(
TinyPICO Nano V4
Sold by Unexpected Maker
$19.50
No tax for United States [change]
Stock available: 50
Volume discount | |
2+ items | $19.00 |
4+ items | $18.50 |
10+ items | $18.00 |
The seller
I'm Seon, the Unexpected Maker!
I design and manufacture my own range of electronics products, mostly around micro-controllers, IOT and products that help with manufacturing.
I'm based in Melbourne, Australia, and all products are made by me and shipped from here to hobbyists, makers, companies and resellers around the world.
I design and manufacture my own range of electronics products, mostly around micro-controllers, IOT and products that help with manufacturing.
I'm based in Melbourne, Australia, and all products are made by me and shipped from here to hobbyists, makers, companies and resellers around the world.