A temperature sensor board built around the TMP117, compatible with SparkFun's quiic system.

• small: 8.5 x 10 mm
• accurate: The TMP117 has
  • +/- 0.1 K (typ) over the whole -50° to 150° C temperature range
  • +/- 0.05 K (typ) between -40 to 70° C
• this board does not use the less accurate "M" or "N" variant
• ADD0 input configurable with a solder jumper
• ALERT output to an LED and a testpoint if you need it externally
• JST SH connector, quiic-compatible pinout
• 1 mm aluminium PCB
• no on-board voltage regulator and level shifting: you can only use it in 3V3 systems!

Important: If you get the variant without ADD0 pre-configured, you'll have to add the solder bridge yourself to configure the sensor's I2C address.

See here for quiic:

https://www.sparkfun.com/qwiic

The small aluminium PCB makes it well suited for applications where you need low thermal resistance, and it integrates well into your existing prototyping environment.