This product was designed by 8086 Consultancy.
By buying this product you support original hardware creators.
RP2040 board with hardware USB Device (plug) and software USB Host (socket).
USB Interposer is a compact RP2040 based board with two USB ports, the USB2 Type-A plug is connected to the hardware USB device and the USB socket is connected to GPIO pins allowing it to be used with Pico-PIO-USB.
The board also has 2 LED on each side (red/amber), 3-pin SH sockets for UART and SWD debug, and a 4-pin SH socket ST/Qw for I2C. The BOOT button is also available as a user button.
The USB Host port can be used with CircuitPython (USB HOST) or Arduino software.
| GPIO | Name | Description |
|---|---|---|
| GP0 | UART TX | Serial Port |
| GP1 | UART RX | Serial Port |
| GP7 | LED | Top Red |
| GP8 | LED | Top Amber |
| GP12 | Button | User/BOOT |
| GP14 | SDA | I2C St/Qw Port |
| GP15 | SCL | I2C St/Qw Port |
| GP16 | D+ | USB Socket |
| GP17 | D- | USB Socket |
| GP18 | USB PWR Enable | USB Socket |
| GP22 | LED | Bottom Red |
| GP23 | LED | Bottom Amber |
| GP26 | ADC | /2 voltage on VBUS Input |
| GP27 | ADC | /2 voltage on VBUS Output |
Links to code and documentation
No additional links provided for this product.
Product HS Code: 847180
Shipping policy
Please ensure your address is full and correct before placing an order and be aware I'm unable to use some shipping methods to PO boxes.
Deliveries to the USA are sent using RoyalMail PDDP (Postal Delivery Duties Paid).
The seller
Maker of things mostly for the Raspberry Pi and Arduino world.