This product was designed by 8086 Consultancy.
By buying this product you support original hardware creators.
5v UART to CDC USB adapter
uUSB/USB-C CDC Serial Adaptor (5v)
Sold by 8086 Consultancy
$4.48
No tax for United States [change]
Stock available: 82
USB Serial Adaptor - with either micro USB or USB-C connector.
Using jumper wires it can be used for Arduino programming (using RTS for reset), etc.
We use through hole connections on both micro USB and 6 way 0.1" header socket for a more robust product over the surface mount alone.
| Pinout | Description |
|---|---|
| RTS | Request to send |
| RX | Receive (connect to remote TX) |
| TX | Transmit (connect to remote RX) |
| 5V | 5V supply |
| CTS | Clear to send |
| GND | Ground |
The following baud rates are supported
| Baud rate | Miss rate (%) |
|---|---|
| 2,400 | 0.16 |
| 4,800 | 0.16 |
| 9,600 | 0.04 |
| 19,200 | 0.04 |
| 38,400 | 0.16 |
| 57,600 | 0.16 |
| 115,200 | 0.16 |
| 230,400 | 0.16 |
| 460,800 | 0.79 |
| 1,700,000 | 0.84 |
| 2,300,000 | 0.62 |
| 3,400,000 | 0.84 |
This board can only be used with systems using 5 volts, connecting to those using higher/lower voltages may result in damage.
The IC is used in the adapter enumerates as a Communication Device Class (CDC) device which modern (Win10/Linux/Mac OS X) operating systems have built in drivers for.
Ideal for use with the RC2014.
Links to code and documentation
No additional links provided for this product.
Shipping policy
Please ensure your address is full and correct before placing an order and be aware I'm unable to use some shipping methods to PO boxes.
Deliveries to the USA are sent using RoyalMail PDDP (Postal Delivery Duties Paid).
The seller
Maker of things mostly for the Raspberry Pi and Arduino world.