Main product image for RaspyJack Case for Raspberry Pi Zero UPS Hub
Product image 1 for RaspyJack Case for Raspberry Pi Zero UPS Hub
Product image 2 for RaspyJack Case for Raspberry Pi Zero UPS Hub
Product image 3 for RaspyJack Case for Raspberry Pi Zero UPS Hub
Product image 4 for RaspyJack Case for Raspberry Pi Zero UPS Hub
Product image 5 for RaspyJack Case for Raspberry Pi Zero UPS Hub
Product image 6 for RaspyJack Case for Raspberry Pi Zero UPS Hub
Product image 7 for RaspyJack Case for Raspberry Pi Zero UPS Hub
3D-printed Raspberry Pi Zero case for RaspyJack builds using the SEENGREAT Pi Zero UPS USB HUB Rev 1.2. Includes screws and standoffs.
3D printing

A part-assembled RaspyJack case for Raspberry Pi Zero builds using the SEENGREAT Pi Zero UPS USB HUB Rev 1.2 board shown in the photos.

A vented, screw-together case for your Raspberry Pi Zero RaspyJack build. The case arrives part-assembled, with the screws and standoffs positioned so you can see where they go. Cutouts give you access to the three USB hub ports, USB power, HDMI and microSD.

Check your UPS board before ordering

Use the SEENGREAT Pi Zero UPS USB HUB Rev 1.2 shown in the product photos as your reference.

Please NOTE: Some boards sold through Amazon US come with a different 18650 holder. The raised black plastic lips on that holder can catch on the case Lid and may need a small trim for clearance.

If your holder looks different or the board sits proud of the base, message me with a photo before trimming. I can help you identify where it’s catching. Remove the battery and disconnect USB power before fitting the board or making any adjustment. Keep the battery contacts and retaining features intact.

What comes in the box

  • One 3D-printed RaspyJack case in your chosen colour
  • M2.5 screws, standoffs and the two small nuts for the base
  • MOLLE-style webbing strap with clip
  • Mesh grille if selected when ordering

You supply the Raspberry Pi, UPS board, display, 18650 battery and any plug-in accessories shown in the photos.

Fitting the base

  1. Start the two screws on one side of the case base and leave them slightly loose.
  2. Fit the two screws on the opposite side with their small nuts.
  3. Once all four screws have started and the base sits flat, tighten them evenly.
  4. Fit the remaining case parts using their original positions as a guide. Tighten the faceplate screws gently.

Assembly help after purchase

If you’re unsure where a screw or standoff goes, use Message seller on Lectronz. Tell me which step you’re on and send a photo if you can. I’ll help you work out what goes where.

Links to code and documentation

No additional links provided for this product.

Product HS Code: 392690

Shipping policy

Processing & Shipping

All of our cases are custom-made to order. We do not hold pre-printed stock, as each case is produced specifically when an order is placed.

Once your order is received, your case will be printed and prepared for dispatch. Orders are normally processed within 1–3 business days, Monday–Friday (excluding holidays).

Once your order has been completed and shipped, you will receive tracking information.

Estimated delivery times:

🇬🇧 UK: Typically 2–5 business days 🇺🇸 USA: Typically 7–14 business days. USA Tracked requires a contact phone number at the shipping step. If the delivery country selector gives an error on the product page, choose United States in the checkout shipping address. 🌎 International: Typically 7–14 business days

Please note that processing times can occasionally be longer during particularly busy periods, as every case is individually printed and prepared to order. We appreciate your patience while we make your custom case.

Thank you for supporting our small business!

Combined postage For orders from TRON CASES, Lectronz calculates one postage charge using the estimated weight of all items plus packaging. If the parcel moves into a higher weight band, the basket shows the updated postage before checkout. Any import duties collected at checkout are shown separately.

RaspyJack Case for Raspberry Pi Zero UPS Hub

Sold by TRON OX-ORVEX

$39.31

No tax for United States [change]
Stock available: 1
Check
Original Design
This product was designed by TRON OX-ORVEX. By buying this product you support original hardware creators.

The seller

TRON OX-ORVEX

TRON OX-ORVEX logo

West Midlands, UK
261 orders since Apr 18, 2026
I’m Tron, the maker behind OXORVEX by TRON. I design and 3D-print cases in the West Midlands for Rabbit Labs boards, HaleHound CYD, RaspyJack and ESP32 builds. I check every case before tracked dispatch.
Need a case for a board I don’t cover? Message me with the model or revision. If you lend me the hardware to design and check the fit, I’ll send it back with a free finished case. We’ll agree the shipping and return arrangements before you send it.