The AMYATX ALL-IN-ONE is a versatile module designed for Amiga computers (such as Amiga 1500, 2000, 2500, 2500UX, 3000, 3000T, 4000, and 4000T) that have been abandoned due to broken power supplies. This converter allows you to replace the original Amiga power supply with a standard ATX one, which is more affordable and easier to find. Here are its key features:

1. Cost and Time Savings: Avoid the hassle of searching for and purchasing expensive and rare original Amiga power supplies.
2. Improved Performance and Stability: Use a standard, powerful, and reliable ATX power supply.
3. Easy Installation: Connect your Amiga to the ATX power supply without modifications or soldering.
4. Compatibility: Works with both 20-pin and 24-pin ATX connectors.
5. Multiple Voltages: Extract various voltages (+3.3V, +5V, +12V, -12V, -5V) from the standard power supply.
6. Synchronization Signal: Maintain correct operation with a 50 Hz (PAL Amiga) or 60 Hz (NTSC Amiga) synchronization signal.
7. LED Status Indicator: Monitor the ATX power supply status (off, standby, or working) using the bicolor LED.

Installation is straightforward:

1. Disconnect your Amiga from the mains and remove the case cover.
2. Connect the wires from the old power supply to the AMYATX ALL-IN-ONE module.
3. Insert the ATX connector into the module.
4. Turn on the ATX power supply.
5. Bridge pins if needed to activate the ATX supply.
6. Check the green LED for confirmation.
7. Power on your Amiga and enjoy!

Two versions are available: Lite (basic) and Full (additional features). The module is universal and can power other retrocomputers or devices with similar voltage requirements. It also produces the TICK signal at different experimental frequencies¹.

Shipping via courier could not be possible in some very rare cases and therefore it will be replaced with other shipping method unconditionally (usually via registered mail).