Main product image for Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)
Product image 1 for Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)
Product image 2 for Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)
Product image 3 for Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)
Isolated Modbus RTU slave for any microcontroller. Read and write 500 Holding Registers over I2C, no Modbus stack needed.
RS232/RS485
I2C
Home automation

IS4310 Datasheet (PDF)


The IS4310-ISO485M1 adds an isolated Modbus RTU slave port to your Arduino, Raspberry Pi, STM32, FPGA or any other microcontroller. Your firmware talks to the module over I2C, and the on-board IS4310 chip handles the whole Modbus RTU protocol on the RS485 side.

Data exchange is simple: values you write to the 500 Holding Registers over I2C can be read by the Modbus master (PLC or PC), and values the master writes can be read back over I2C.

The RS485 bus is galvanically isolated, so the module copes well with long cable runs, electrical noise and ground potential differences between devices.

Specs

  • Modbus RTU slave over isolated RS485
  • Function codes: 0x03, 0x06, 0x10
  • 2 x RJ45 connectors for daisy-chaining
  • I2C address 0x11 (fixed), 100 kHz / 400 kHz / 1 MHz
  • 3.3 V I2C logic, 5 V tolerant
  • Castellated holes for direct soldering onto your PCB
  • Factory settings: Slave ID 1, 19200 bps, even parity, 1 stop bit

Links to code and documentation

Documentation (inacks.com)

Code (github.com)

Schematics (github.com)

Shipping policy

We ship all products from Barcelona via UPS within 1–2 business days. A tracking number is provided. Transit time is typically less than one week worldwide (excluding handling time).

Here are some extras that might be useful for your project!
This is the Modbus RTU slave chip that the module integrates.

Isolated I2C Modbus RS485 Module (IS4310-ISO485M1)

Sold by INACKS

$5.26

No tax for United States [change]
Coming soon! Out of stock? Contact us for stock availability and restocking information.
Sign up to get notified when this product is available.
Check
Original Design
This product was designed by INACKS. By buying this product you support original hardware creators.

The seller

INACKS

INACKS logo

Terrassa, Barcelona, Spain
12 orders since May 12, 2025
INACKS develops and sells integrated circuits with built-in communication protocol stacks.
Our chips help you cut firmware development time and costs related to protocol implementation, so you can bring products to market faster.
If you need a specific communication protocol, contact us.
Thank you!