Little Big Scroll 4

A simple, low cost and easy to build macro pad featuring 4 keys and a clickable encoder wheel.

The macro pad can be used for hotkeys, shortcuts, or media controls, limited only what you can imagine and manage to program QMK to do.

The macro pad can be built with either 4 keys and a clickable encoder wheel, or by replacing the top two keys with an OLED display, which can be programmed to show pretty much whatever you prefer.

Quick Facts

• Low Cost, minimal components needed.
• Easy to build, beginner level soldering.
• Optional layout 2 keys + OLED or 4 keys.
• Encoder Wheel w Pushbutton, allowing up to a 40 mm wheel size.
• Full per-key RGB + encoder wheel glow.
• Powered by QMK Firmware, flexible and powerful.
• VIAL preconfigured firmware allows you to dynamically assign keys.

Comes as an easy to build kit with nearly every component needed to finish it!

Included in Kit

• 1 pcs Main PCB
• 1 pcs Plate (4-keys), with cut-away tabs, allowing it to act as bottom plate.
• 1 pcs Plate (OLED + 2-keys), with cut-away tabs, allowing it to act as bottom plate.
• 4 pcs Kaihl hot-swap sockets.
• 1 pcs EC-11 Rotary Encoder w Pushbutton (incl. 2x 100nF capacitors).
• 4 pcs M2 Brass spacers, 8x M2 Countersunk hex head screws.

Optional components

• 1 pcs 0.91" OLED Display (incl. 2x 4.7 kOhm resistors).
• 6 pcs SK68xx mini-E addressable RGB LED's
• 1 pcs Encoder wheel, Black Aluminium 40mm
• 1 pcs Socket kit for controller

NOT Included in kit, needed to complete the build.

• 1 pcs Pro Micro or equivalent controller.
• 4 pcs Cherry MX style key switches.
• Your choice of Keycaps, Encoder Wheel, and USB cable.

Please keep in mind!

If you are using the style of Pro Micro controllers with USB C connectors and an original Atmega32u4, many of these have a PCB that are slightly longer than the 'original style' Pro Micro with Micro USB, and since this design is as minimal and slimmed as possible, these can stick out past the PCB/Plate. This is altogether a cosmetic concern though, and not a functional issue.

A suitable USB C Promicro that fits inside the PCB outline, as well as an RP2040 alternative are available under the "Extra's" tab.

Normal handling time is 3-5 working days (Predominantly done on weekends) Build items usually take 1-2 weeks. All packets are represented to courier services and customs at their true value, and all responsibility for import fees, taxes and tariffs resulting there of lies with the buyer.

All items (as originally delivered) are sold with a 24 month limited warranty, as per (2011/83/EU). Shipping of items returned for repair is solely the responsibility of the buyer. (This includes taxes/customs fee's from incorrect/incomplete documentation.)

The SE "Act on Distance Contracts and Off-Premises Contracts" (SFS 2005:59) & The EU "The Distance Selling Directive" (97/7/EC) allows returns of the items initiated within 14 days of receiving it. Shipping of returned items is solely the responsibility of the buyer.

(Please note that in the case of kits as is mainly sold here, this does no longer apply once you start soldering/building the kit as it is then no longer in it's original condition, and you have at that point explicitly accepted the purchase contract! Please test components and initiate a warranty claim BEFORE you solder them!)